CFD PROJECTS

  • CFD001
    CFD Analysis of aconomizer in a tangential fired boiler
  • CFD002
    CFD analysis and comparison of vertical tube with smooth tube
  • CFD003
    ACDF-based analysis of the 14-bis aircraft aerodynamics and stability
  • CFD004
    CFD analysis of gas flow behaviour in economizer duct
  • CFD005
    Combined aerodynamic and structural optomzation of a high-speed civil transport wing
  • CFD006
    Fluid flow and temperature distribution in radiators used in automobiles
  • CFD007
    Analysis of Cyclone dust collector air flow
  • CFD008
    CFD analysis of shell and tube heat exchanger with fins for waste heat recovery application
  • CFD009
    Atheoretical analysis and CFD simulation on the on the ceramic monolith heat exchanger
  • CFD010
    Analysis of water flow for Laminar & Turbulent Flow in Conventional Water Tap
  • CFD011
    CFD Investigation of Airflow on a SANTRO Zing Car by using Fluent
  • CFD012
    CFD analysis of rocket nozzle
  • CFD013
    CFD analysis of supersonic exhaust in a scramjet engine
  • CFD014
    Aerodynamic Design for Bus/Car Vehicle
  • CFD015
    CFD analysis of exhaust manifold
  • CFD016
    CFD analysis of centrifugal fan
  • CFD017
    CFD analysis of intake manifold in SI engines
  • CFD018
    CFD modelling of the automobile catalytic converter
  • CFD019
    CFD analysis of fluid flow and heat transfer in a single tube-fin arrangement of an automotive radiator
  • CFD020
    Computational flow field analysis of a vertical axis wind turbine
  • CFD021
    CFD analysis of mixed flow pump impeller
  • CFD022
    CFD analysis of flow through venture meter to determine the coefficient of discharge
  • CFD023
    Design improvements on mixed flow pumps by means of computational fluid dynamics
  • CFD024
    Turbulent flow simulation in Kaplan draft tube
  • CFD025
    Flow analysis of marine propeller
  • CFD026
    Design and analysis of globe valve as control valve using CFD software
  • CFD027
    Numerical analysis of wax melting
  • CFD028
    CFD analysis of fuel tank sloshing
  • CFD029
    Conjugate heat transfer analysis in electronics devices
  • CFD030
    CFD Analyses Of The Gas Flow Inside The Vessel Of A Hot Isostatic Press
  • CFD031
    Investigation of Film Cooling Strategies CFD versus Experiments-Potential for Using Reduced Models
  • CFD032
    Advanced Design For A Tail Wing For Better Performance.
  • CFD033
    Air and fuel flow interaction in combustion chamber for Various injector locations
  • CFD034
    Design and analysis of dust collector using CFD
  • CFD035
    Reduction of drag in a buggy car model
  • CFD036
    Nozzle design optimization for to reduce noise for turbo jet engine.
  • CFD037
    Design And Optimization In Automotive Cabin Cooling
  • CFD038
    CFD for electric car battery cooling system design
  • CFD039
    Analysis of multiphase flow in open channel flows using CFD 
  • CFD040
    CFD analysis of diffuser
  • CFD041
    CFD analysis of engine valve  
  • CFD042
    Turbulence models in CFD
  • CFD043
    CFD analysis of a simple convergent flow using ANSYS
  • CFD044
    Fluid and thermal behaviour of natural convective boiling at a submerged heated surface
  • CFD044
    Thermal modeling of “Green House Effect”
  • CFD046
    CFD Analyses of Ship Hull Forms
  • CFD047
    CFD prediction of loads on marine structures
  • CFD048
    CFD using the discrete-vortex method 
  • CFD049
    Flow in gutters and downpipes
  • CFD050
    Flow through/past sparse bodies
  • CFD051
    CFD Solution of Internal (shock tube and coquette flow) & External (Airfoil and cylinder) flow
  • CFD052
    Aerodynamic design study of ground vehicles
  • CFD053
    Hydraulic design and performance analysis of a Mixed Flow Pump for marine water jet propulsion
  • CFD054
    HeatTransferinanAutomotiveTurbochargerUnderConstantLoadPoints:a Computational Investigation
  • CFD055
    Design and Analysis of a Radial Turbine with Back Swept Blading
  • CFD056
    Micro channel Heat Sinking: Analysis and Optimization
  • CFD057
    Numerical Solution of Navier – Stokes Equations for Separating and Reattaching Flow over a Double Steps Expansion and Contraction
  • CFD058
    Comparative Study of Turbulence Models in Separated-Attached Diffuser Flow
  • CFD059
    Simulating the Blood Flow for the Aorta with a Stenosis
  • CFD060
    Flow Characteristics in a Cross-Flow Fan with Various Design Parameters
  • CFD061
    Effect of Swept Blade on Performance of a Small Size Axial Fan
  • CFD062
    Assessment of turbulence modeling for CFD 
  • CFD063
    Simulations into hydro turbines: spiral casings
  • CFD064
    A CFD Study Of Conventional And Under Floor Air Distribution System
  • CFD065
    CFD Design Tool Improves HVAC Design and Cuts Product Development Cycle Time
  • CFD066
    CFD Analysis Of Airflow And Temperature Distribution In Buildings
  • CFD067
    Design and validate the HVAC system by CFD
  • CFD068
    A study of computational fluid dynamics Applied to room air flow
  • CFD069
    Computational fluid dynamics for turbo machinery design
  • CFD070
    CFD calculation of convective heat transfer coefficients and validation
  • CFD071
    CFD Simulation Of Soot Formation And Flame Radiation
  • CFD072
    Evaluation of CFD to predict smoke movement in complex enclosed spaces
  • CFD073
    Mitigating snowdrift at the elevated SANAE IV research station in Antarctica: CFD simulation and field application
  • CFD074
    CFD based process modeling of a rotary furnace for Aluminium scrap melting
  • CFD075
    CFD Application of Flameless Oxidation in Glass Melting Furnaces 
  • CFD076
    Aluminum Melting Furnace Design Optimization to Improve Energy Efficiency by Integrated Modeling
  • CFD077
    CFD Modeling of a Flat Plate
  • CFD078
    CFD analysis of natural convection in differentially heated enclosure 
  • CFD079
    CFD Modeling and Quality Forecasting for Cooling and Storage of Pelagic Species 
  • CFD080
    CFD Modeling and Quality Forecasting for Cooling and Storage of Pelagic  Species 
  • CFD081
    Heat Transfer Modeling of Large Shipping Containers 
  • CFD082
    CFD Analysis of Container Ship Sinkage, Trim and Resistance 
  • CFD083
    Design and CFD Simulation of a Battery Module for a Hybrid Electric Vehicle Battery Pack
  • CFD085
    A vehicle body drags analysis using computational fluid Dynamics
  • CFD086
    CFD Analysis of PACE Formula-1 Car
  • CFD087
    Study of F1 car aerodynamics front wing using computational Fluid dynamics (CFD) 
  • CFD088
    CFD Analysis of Mixing and Combustion of a Scramjet Combustor with a Planer Strut Injector
  • CFD089
    CFD analysis of combustion and emissions to study the effect of compression ratio and biogas substitution in a diesel engine
  • CFD090
    Evaluation of CFD Sub-Models for the Intake Manifold Port Flow Analysis
  • CFD091
    ABSTRACT - ANA - PERFORMANCE ANALYSIS AND EMISSION CHARACTERISTICS OF PINE OIL BLENDED WITH DIESEL IN DIESEL ENGINE - BIO DIESEL
  • CFD092
    FEA AND NUMERICAL INVESTIGATION OF TRUST VECTOR CONTROL BY ANSYS - CFD
  • CFD093
    ANALYSIS AND SIMULATION OF WATER DRY OVEN FOR INDUSTRIAL APPLICATIONS - ANSYS WITH CFD
  • CFD094
    A VEHICLE BODY DRAGS ANALYSIS USING COMPUTATIONAL FLUID DYNAMICS
Read More >>