EXPERIMENTAL PROJECTS

  • EX119
    Comparative Stress Analysis and Mechanical Properties Investigation of Al Metal Matrix Spur Gear with Various Reinforcements
  • EX120
    An Investigation and Optimization of Coaxiality Error Analysis with Hard Turning Process on Aisi4340
  • EXP001
    An Effect and Performance Characteristics of Intake Air Temperature in CI Engine
  • EXP002
    Comparison of Performance Cryogenic Treated and Untreated Carbide Inserts in Turning on AL& AL2 O3 Metal Matrix Composites
  • EXP003
    Effect and Experimental Investigation of Nano Fluid based Solar Water Heater
  • EXP004
    Efficient Method of Producing Oval Punching Holes on Sheet Metal With FEA Result
  • EXP005
    Effect of Thermo Mechanical Analysis of GMAW by using SA 387(Grade 12) Pressure Vessel Material
  • EXP006
    Comparative Performance Evaluation of PVD Coated and CVD Coated Inserts In CNC Turning of EN8 And EN47
  • EXP007
    Experimental Investigation and Thermal Analysis of Battered Region of EDM Machining on OHNS Die Steel
  • EXP008
    Design and stress analysis of oval punching holes on sheet metal
  • EXP009
    Comparative and Experimental Investigation of Aluminium-Boron Carbide Composites with Different Composition
  • EXP010
    Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 2024-Al2o3&Flyash Metal Matrix Composite
  • EXP011
    Evaluation of Machining Behaviours of Aluminium Metal Matrix Composite (AL+SIC+ZN)
  • EXP012
    Experimental Investigation in TIG Welding Parameter to Increase the Tensile Strength
  • EXP013
    Experimental and FEA of Angle Cutting Die to Attain Exact Geometry at Cutting Face
  • EXP014
    Experimental Investigation of Fibre Orientation in Glass Fibre Reinforced Thermoplastic Composites
  • EXP015
    Experimental Investigation and Engine Performance Characteristics of a Diesel Engine by Mahua Biodiesel
  • EXP016
    Experimental Investigation of the Properties and Wear Resistance of the Cr-N PVD Coatings
  • EXP017
    Experimental Investigation of the Properties and Wear Resistance of the Cr- N PVD Coatings for Tool Steel
  • EXP018
    The Investigation and Development of Small Amount Wear Evaluation and Transformed Layer Thickness by Friction Under Lubrication by Reflective Transmission Spectroscopy
  • EXP019
    Experiment Investigation to Increase the Mechanical Characterization of Aluminum with Silicon Carbide Composite
  • EXP020
    Experimental Investigation and Synthesis of FE3O4/AU Composite Nanoparticles and Evaluation of their Properties
  • EXP021
    Experimental and Optimization of Machining Parameters in EDM of CFRP Composite using Taguchi Technique
  • EXP022
    An Experimental Investigation of Multi- Layered Ceramic Coating on Piston
  • EXP023
    An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 304 Austenitic Stainless Steel using M42 Cobalt Drill Bits
  • EXP024
    An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 316 Austenitic Stainless Steel using M42 Cobalt Drill Bits
  • EXP025
    An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 410 Austenitic Stainless Steel using M42 Cobalt Twist Drills
  • EXP026
    An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 316 Austenitic Stainless Steel using Different Twist Drills
  • EXP027
    An Experimental Investigation and Implementation of Carbon Fibre With Banana for Brake Lining Application
  • EXP028
    Thermo Mechanical Analysis of Dissimilar Joints with EN24 and SS 409 Stainless Steel by using FCAW
  • EXP029
    Comparative performance evaluation of PVD coated and CVD coated inserts in CNC turning of EN8 & EN47
  • EXP030
    Analysis and Investigation of Generated During Pyrolysis of Waste Plastics and its Steam Cracking
  • EXP031
    An Experimental Investigation for Material Removal Rate in EDM using Tool of Graphite, Copper
  • EXP032
    Elastic Analysis of TUBE-FIN Structures Subjected to Combined Bending and Compression
  • EXP033
    An Experimental Investigation of Surface Modification in Stainless Steel by Aluminium Powder using Thermal Spray Technique
  • EXP034
    Experimental Analysis and Optimization of Electrical Discharge Machining on Inconel 600 with FEA
  • EXP035
    An Investigation and Proposal of a Solution for Unit Processing Time Job Shop Scheduling Problem
  • EXP036
    An Experimental Investigation of Mechanical Properties of Glass Fibre with Prosopis Julifora as Natural Fiber Reinforced Polymer Composites
  • EXP037
    An Investigation and Optimization of CFRP by using End Milling with Taguchi Technique
  • EXP038
    An Investigation of Ash Particle Formation During Combustion of a Simulated Coal
  • EXP039
    Analysis and Curvature Optimal Corner Smoothing Algorithm for Three and Five Axes Trajectory Generation
  • EXP040
    Analysis and Experimental Investigation of Gasification Behaviours of Woody Biomass in a Packed Red Reactor
  • EXP041
    Analysis and Experimental Suppression of Vibration in Cutting Machine
  • EXP042
    Analysis of Anodic Oxide Porous Alumina Templates and Development of Nanowire Surface Fasteners
  • EXP043
    Analysis of Characterization and Effects of Fiber Pull Outs in Hole Quality of Carbon Fiber Reinforced Plastics Composite
  • EXP044
    Analysis and Experimental Investigations of Weld Characteristics for a TIG Welding with SS 304L and 410
  • EXP045
    Analysis on Fabrication of Anodic Oxide Porous Alumina Templates and Development of Nanowire Surface Fasteners
  • EXP046
    Analysis of Oxy-Fuel Combustion Behaviours of Coal in a Fluidized Bed
  • EXP047
    Analysis on Non Destructive Evaluation of Thermal Fatigue Cracks on Metal Surface
  • EXP048
    Analysis and Effect of Swirl Flow on Combustion Field in Cyclone Jet Combustor
  • EXP049
    Analysis of Geometrical Effects of Carbon Fiber Reinforced Plastics Composite with Various Coated Drill Bits
  • EXP050
    An Experimental Investigation of Mechanical Properties of Jute Fibre with ABS and Prosposis Julifora as Natural Fiber Reinforced Hybrid Polymer Composites
  • EXP051
    Comparative and Experimental Investigation for Reducing Cutting Tool Wear Rate by Cryogenic Technique
  • EXP052
    Some Experimental Investigation on Die Steel in Electric Discharge Machining with Various Parameters and Electrode
  • EXP053
    Effect and Experimental Investigation of Boron Carbide in Tensile and Wear Characteristic of Aluminium Composite
  • EXP054
    An Experimental Investigation and Surface Roughness Prediction of D2 with Ball Mill Tooling using DRO Milling Process
  • EXP055
    Experimental Investigation and Fabrication of Removal of Iron and Manganese In Ground Water
  • EXP056
    Experimental Study on Thermal Ratcheting Behavior of Ferritice Heat Resistant Pipe Elements at Very High Temperatures Application
  • EXP057
    Experimental Investigation and Fabrication of Brake Pad using Natural Composite Material
  • EXP058
    FEA Analysis of Cutting Force Model in Milling Operation
  • EXP059
    FEA and Experimental Investigation and Thermal Properties of the Ceramic Coating on Aluminium Piston by Plasma Spray Technique
  • EXP060
    FEA Analysis and Experimental Evaluation of Piston with Plasma Spray Coating
  • EXP061
    FEA Analysis on Combustion Characteristics in Porous Medium Injector of Ultra Micro Combustor with Hydrogen Fuel (In the Case of Fibrous Porous Media)
  • EXP062
    Experimental Investigation on Aluminium Metal Matrix Composite in EDM with Various Parameters (AL+SIC+ZN)
  • EXP063
    Experimental Investigation in TIG Welding Parameter to Increase The Tensile Strength, Surface Finish, in HAZ using Various Destructive Test and FEA
  • EXP064
    Experimental Investigation of the Properties and Wear Resistance of the TI-N Plasma Spray Coatings for Tool Steel
  • EXP065
    Investigation and Effect of Atmospheric Pressure Plasma on Soot and NOX Emissions
  • EXP066
    FEA Numerical and Experimental Investigation of Ceramic Coating on Engine Valve by Plasma Spray Technique
  • EXP067
    Experimental Investigation of Glass Fibre Epoxy Reinforced with Coconut and Coir Fibre
  • EXP068
    Geometrical Evaluation and Surface Roughness in Drilling Al 6082 –B4C & Flyash Metal Matrix Composites using DOE Principle
  • EXP069
    Geometrical Evaluation and Surface Roughness in Drilling Al 2024 -SI3N4 Metal Matrix Composites using DOE Principle
  • EXP070
    Experiment Investigation to Increase the Mechanical Characterization of Aluminium with Silicon Carbide Composite
  • EXP071
    Numerical Study on Combustion Characteristics of Rich-Premixed Gas Opposed by High Temperature Air using Elementary Reaction
  • EXP072
    Numerical Analysis and Simulation of DPF Regeneration Process
  • EXP073
    Optimization and Mechanical Property Analysis of Friction Drilling On Aluminium and Alloy Steel by using Tungsten Carbide Drill Bit
  • EXP074
    Performance Analysis and Experimental Investigation of Brake Pad using Aluminium –Silicon Carbide
  • EXP075
    Numerical Study on Interaction between Flame and Wall of Propane Air Premixed Flame
  • EXP076
    Machinability Evaluation and Optimization of Carbon Fiber Reinforced Plastic by using CNC Turning
  • EXP077
    Performance Investigation & Comparison of Different Phase Change Material in Heat Exchanger
  • EXP078
    Performance and Emission Characteristics of Diesel Engine Blended with Eucalyptus Methanol Groundnut Oil with KOH
  • EXP079
    Optimization and Mechanical Property Analysis of Friction Drilling on Aluminium and Alloy Steel by using K20 Solid Carbide Drill Bits
  • EXP080
    Numerical Study on the Combustion Characteristics in Ultra –Micro Combustor with Porous Wall Considering Surface Reaction
  • EXP081
    Investigation of Functional Improvement and Mechanical Evaluation of Fatigue Crack Healing by Surface Activated Pre Coating Method
  • EXP081
    Numerical Analysis on Combustion Behaviour of Fuel Spray Injected into High Temperature Air
  • EXP083
    Investigation and Fabrication of Atmospheric Air Pollution Removal for Domestic and Industrial Usage
  • EXP084
    Study on Tar Decomposition Characteristics During High Temperature Steam Gasification of Plastic Wastes
  • EXP085
    The Tribological Property Comparison of IBAD CNX and DLC Coating
  • EXP086
    Study on Combustion Characteristics of Pulverized Coal by Air Mixed with Hydrogen
  • EXP087
    Study on Quantitative Evaluation of Pipe Wall Thinning using Frequency Characteristics of Microwave Method
  • EXP088
    Investigation of Change of Ash Compositions in Cokes during Combustion Process
  • EXP089
    Performance Analysis of Renewable Energy Thermo Electric Refrigeration System
  • EXP090
    Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 6063- ZRO2 & Flyash Metal Matrix Composite
  • EXP091
    Study on Effects of Flue Gas Circulation on NOX Emission Coal Combustion
  • EXP092
    Study on Characteristics and Scattering Behavior of Molecular Beam
  • EXP093
    Thermal Stresses Due to Electrical Discharge Machining on D3 Steel
  • EXP094
    Performance, Combustion and Emission Characteristics of Urea-SCR in C.I. Engine Fuelled with Diesel – Pine Oil – Eucalyptus – KOH Blends with Multi-Layered Ceramic Coated Piston
  • EXP095
    Performance, Combustion and Emission Characteristics of Pine Oil – Eucalyptus – KOH - and its Diesel Blends in a DI Diesel Engine using Ceramic Coated Piston
  • EXP096
    Geometrical Evaluation and Surface Roughness in Drilling Al 6061 –AL2O3&SIC Metal Matrix Composites using DOE Principle
  • EXP097
    Geometrical Evaluation and Surface Roughness in Drilling Al 60161 –AL2O3&ZRO2 Metal Matrix Composites using DOE Principle
  • EXP098
    Geometrical Evaluation and Surface Roughness in Drilling Al 7075 –ALN& SIC Metal Matrix Composites using DOE Principle
  • EXP099
    Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 5052-B4C& Flyash Metal Matrix Composite
  • EXP100
    Study on Ash Deposition on a Heat Transfer Tube and its Control in a Waste Incinerator
  • EXP101
    Experimental Analysis and Geometrical Effect on En24 in CNC Drilling with Coated Drill Bit
  • EXP102
    Experimental Investigation in Arc Welding Parameter to Reduce the Residual Stress Analysis for Avoid Cold Cracks
  • EXP103
    Surface Characteristics and Machining Performance of Hard Carbon Coated And HSS Drill Bits On AA6082
  • EXP104
    Comparative Analysis of Drilling Performance and Process Parameter Optimization on HCHCR with Coated and Uncoated Drill Bits
  • EXP105
    Coating Efficiency And Drilling Characterizes Optimization On AZ91-MG With Hard Carbon And HSS Drill Bits With DOE Technique
  • EXP106
    Experimental Study of Drilling Parameters on Machining and Geometrical Character of UHMWPE by using Coated and Uncoated Drill Bits
  • EXP107
    Comparative Analysis of Drilling Characteristics On Hybrid Fiber Composites With Taguchi Based GRA
  • EXP108
    Coating Efficiency and Drilling Characterizes Optimization on AZ91 under Dry Conditions with DOE Technique
  • EXP109
    Process Optimization of Hybrid Metal Matrix with Different Coated Drill Bits Based On Drilling Process Parameters
  • EXP110
    An Investigation and Machinability Evaluation of SS304 with Different Coated Drill Bits by Using VMC
  • EXP111
    Mechanical & Tribological Properties Investigation on Prosopis Juliflora Bark Hybrid Fiber Matrix
  • EXP112
    Machining Character Evaluation and High Precision Abrasive Waterjet Cutting of Prosopis Juliflora Bark Hybrid Fiber Matrix
  • EXP113
    Mechanical Properties Investigations and High Precision Abrasive Waterjet Cutting of Prosopis Juliflora Bark Hybrid Fiber Matrix
  • EXP114
    A Compared Analysis and Evaluation of Prosopis Juliflora Bark Hybrid Fiber Matrixes with & Without Water Absorption
  • EXP115
    Mechanical Properties Investigations and High Precision Abrasive Waterjet Cutting of Prosopis Juliflora Bark Hybrid Fiber Matrix
  • EXP116
    Experimental and FEA of Angle Shearing Die to Attain Exact Geometry at Cutting Face
  • EXP117
    Experimental Investigation and Turning Process Parameters Optimization Aa1100 with Various Node Radius
  • EXP118
    Stress Analysis and Weld Strength Evaluation of Fsw on AA6082 with Various Tool Shoulders
  • EXP121
    Thermal Stress Analysis and Comparative Drilling Performance of Coated and Uncoated Drill Bits on Ohns
  • EXP122
    Effect of Fly Ash powder on Mechanical Properties and Wear Characteristics of Jute-Glass hybrid epoxy composites
Read More >>